Home> Industry Information> How to choose different types of basin faucet?

How to choose different types of basin faucet?

December 07, 2022

How to choose different types of basin faucet?

Faucets seem simple without any content, in fact, in the purchase of a great hall. Faucets are divided into three categories: single hole, double hole, three hole, choose according to local conditions.

1 hole basin faucet: Because two soft tubes are connected to a tap, the water amount is restricted. This combination of hot and cold single hole basin faucet, commonly found in the Eco Friendly Cold Mixer Basin Faucet of high faucet. It means that hot and cold water are  respectively introduced by two pipe holes, and the water is discharged by a nozzle. Its water temperature is adjusted by a handle left and right to achieve. Generally, the left side is hot water, and the right side is cold water. This valve, in fact, is often said, commonly used cold and hot mixed water valve.

2 holes basin faucet: most of them are integral mixed faucets, which are common products. Simple and generous shape, easy to adjust hot and cold. Generally, Eco Friendly Cold Mixer Basin Faucet is to lift or press down the handle to adjust the water volume, and to adjust the water outlet temperature according to the indicator. It means that hot and cold water are respectively introduced by two pipe holes, and the water is controlled by two valves and a water nozzle is discharged. The water temperature is controlled by the two valves respectively left and right adjustment to achieve, the water temperature is easy to control. Very suitable for general family use. This kind of Eco Friendly Cold Mixer Basin Faucet is recommended to choose high quality ceramic valve to extend the service life. Double hole faucets can also be installed integral but separately tuned for hot and cold faucets.

Eco Friendly Basin Faucet

3 holes basin faucet: also known as "separate" basin faucet. The shape appears noble and generous, suitable for large table, big basin. Occupy a larger place than the above single hole, two holes, the installation is slightly more complex. Hot Cold Mixer Basin Waterfall Taps is inconvenient to operate thermostat with one hand. But at the same time it comes out, it's a lot of water, it can fill up in a short time.

The main difference between single hole and double hole of faucet is as follows: there is a single cold source and hot and cold mixed water, and there is a different installation position of water and water. There are single - hole cold faucets and mixed faucets, and double - hole faucets are mixed faucets. Among Hot Cold Mixer Basin Waterfall Taps, the double hole faucet is mainly installed in the wash basin and shower, the single hole faucet is mainly used for washing basin or wash basin. Single-hole faucet and porous faucet is not good or bad, mainly according to the water source and installation to choose single-hole faucet or porous faucet.

Hot Cold Basin Waterfall Taps

Precautions for basin faucet installation:

If you buy a shower, bathtub, wall faucet, it is necessary to choose the right height buried water pipe. The distance between hot and cold water pipes is about 20 centimeters. Flush the water pipe before installation to avoid damage to the Universal Multifunction Bathroom Faucets due to hard water quality.

Dark shower, Bathtub Faucet: After buying dark faucet, generally the spool of the faucet should be embedded in the wall. The thickness of the toilet wall should be considered before embedding. If the wall is too thin, the spool will not be embedded. Do not remove the plastic protective cover of the spool when it is embedded, so as to avoid damage to the spool by cement and Other chores during the embedment. In addition, when embedding the spool, attention should be paid to the direction of the spool up and down and around, so as not to bury the spool wrong.

The installation of single-hole basin faucet is due to the high use frequency of kitchen faucet, and it is easy to loosen when moving to move. All the requirements are stable, so the lock nut must be tightened. At present, there are a number of building materials on the market to increase the screw nut fixed, super good stable effect. The obvious effect will become a generation trend.

If you are interested in our Universal Multifunction Bathroom Faucets, please click the link:

https://www.kpaidafaucets.com/a2-basin-faucet-1935990/62509675.html

Universal Multifunction Bathroom Faucets

The above is the How to choose different types of basin faucet? we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> How to choose different types of basin faucet?
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send